Amana Tool 49519 5/8" Radius Corner Rounding Over Edge Router Bit
SHIPPING OPTION(S): GROUND, LTL TRUCK, AIR
PRODUCT CODE: AM-49519
2 Flute With Ball Bearing Guide Assembly. The basic edge-forming bit,the corner-rounding bit rounds an edge to a given radius.The tool is shouldered to cut a fillet. The cut can be usedto ease edges, as a simple profile, or as a part of a complexone. Also known as roundover, rounding over, and quarter-round.If a smaller pilot bearing is used, a second shoulder can be produced, in effect making the bit a beading bit.
$79.95
PRODUCT CODE
AM-49519
Amana Rounding Over Bits
2 Flute With Ball Bearing Guide Assembly. The basic edge-forming bit,the corner-rounding bit rounds an edge to a given radius.The tool is shouldered to cut a fillet. The cut can be usedto ease edges, as a simple profile, or as a part of a complexone. Also known as roundover, rounding over, and quarter-round.If a smaller pilot bearing is used, a second shoulder can be produced, in effect making the bit a beading bit.
D |
R |
B |
d |
L |
Tool No. |
|
13/16
|
5/32
|
3/8
|
1/2
|
2-1/4
|
AM-49501
|
|
1
|
1/4
|
1/2
|
1/2
|
2-7/16
|
AM-49506
|
|
14!
|
1-3/4 |
5/8 |
7/8 |
1/2 |
2-3/4 |
AM-49519
|
14!
|
2 |
3/4 |
1 |
1/2 |
2-7/8 |
AM-49520
|
14!
|
1/2 |
3/4 |
1 |
1/2 |
2-3/8 |
AM-57139
|
| Warning: Maximum RPM 14!= 14,000 | ||||||
Maximum RPM Guide For Amana Tool Router Bits
Do not exceed the maximum RPM shown for the particular tool you are using. Max RPM for symmetrical tool only!
| Router Bit Dimensions | Max RPM |
| 2" (Less than 50) | 28,000 |
| 2" - 2-3/8" (50-60mm) | 22,000 |
| 2-3/8" - 2-3/4" (60-70mm) | 19,000 |
| 2-3/4" - 3-1/4" (70-80mm) | 16,000 |
| 3-1/4" - 3-5/8" (80-90mm) | 15,000 |
| 3-5/8" < (90-100mm) | 13,000 |
| Note: Please also refer to laser etching on router bit shank for most updated RPM speed rating. | |
| Amana Tool Type | Router Bits |
|---|---|
| Router Bit Type | Rounding Over Bits |
| Replacement Bearing Type | #47706 |
