Amana Tool Rounding Under Edge Router Bits - 2 Sizes Available
SHIPPING OPTION(S): GROUND, LTL TRUCK, AIR
PRODUCT CODE: AM-RUEB-GROUP
Use with corner rounding bits, to cut a full 180° bull-nose on 1/2", 1", 1-1/2" or 2" thick stock without turning the material over. (Two 30"x98"x1/2" laminated sheets = 200+ lbs.). Also useful for 'on-site' cutting where a conventional round-over cannot be used. Furnished with Ultra-Glide™ non-marring Delrin® sleeved ball bearing guide.
PRODUCT CODE
AM-RUEB-GROUP
Product Name |
---|
Amana Tool 57138 1/2" Radius Corner Rounding Under Edge Router Bit |
Amana Tool 57140 3/4" Radius Corner Rounding Under Edge Router Bit |
Amana Rounding Under Bits
Use with corner rounding bits, to cut a full 180° bull-nose on 1/2", 1", 1-1/2" or 2" thick stock without turning the material over. (Two 30"x98"x1/2" laminated sheets = 200 lbs. +). Also useful for 'on-site' cutting where a conventional round-over cannot be used. Furnished with Ultra-Glide™ non-marring Delrin® sleeved ball bearing guide.
A |
R |
D |
B |
d |
L |
Tool
No. |
|
1 |
1/2 |
2-1/8 |
3/4 |
1/2 |
2-7/8 |
AM-57138 |
|
1-1/2 |
3/4 |
2-5/8 |
1 |
1/2 |
3 |
AM-57140 |
Maximum RPM Guide For Amana Tool Router Bits
Do not exceed the maximum RPM shown for the particular tool you are using. Max RPM for symmetrical tool only!
Router Bit Dimensions | Max RPM |
2" (Less than 50) | 28,000 |
2" - 2-3/8" (50-60mm) | 22,000 |
2-3/8" - 2-3/4" (60-70mm) | 19,000 |
2-3/4" - 3-1/4" (70-80mm) | 16,000 |
3-1/4" - 3-5/8" (80-90mm) | 15,000 |
3-5/8" < (90-100mm) | 13,000 |
Note: Please also refer to laser etching on router bit shank for most updated RPM speed rating. | |
Product Brand / Type | Amana |
---|---|
Amana Tool Type | Router Bits |
Router Bit Type | Rounding Under Bits |