Amana 57154 Flush Trim 3/4 Diameter With Ultra 1/2 Shank
SHIPPING OPTION(S): GROUND, LTL TRUCK, AIR
PRODUCT CODE: AM-57154
Flush cut is designed to finish the cut after using an overhange bit. 3/4 Dia. Bottom bearing. 1” cut length. 2 Flute.
$69.95
PRODUCT CODE
AM-57154
Flush Trim Router Bit For Solid Surface Material
Flush cut is designed to finish the cut after using an overhange bit. 3/4 Dia. Bottom bearing. 1” cut length. 2 Flute.
D |
a° |
d |
L |
Tool
No. |
|
3/4 |
0° |
1/2 |
3-1/2 |
AM-57154 |
Maximum RPM Guide For Amana Tool Router Bits
Do not exceed the maximum RPM shown for the particular tool you are using. Max RPM for symmetrical tool only!
| Router Bit Dimensions | Max RPM |
| 2" (Less than 50) | 28,000 |
| 2" - 2-3/8" (50-60mm) | 22,000 |
| 2-3/8" - 2-3/4" (60-70mm) | 19,000 |
| 2-3/4" - 3-1/4" (70-80mm) | 16,000 |
| 3-1/4" - 3-5/8" (80-90mm) | 15,000 |
| 3-5/8" < (90-100mm) | 13,000 |
| Note: Please also refer to laser etching on router bit shank for most updated RPM speed rating. | |
| Product Brand / Type | Amana |
|---|---|
| Amana Tool Type | Router Bits |
| Router Bit Type | Trim Bits |
| Replacement Bearing Type | #47709 |
